invacare-corporation
Results: 242
Pronto M9I Power Wheelchair
The Invacare Pronto M9I Power Wheelchair is a powered wheelchair designed for use by individuals with lower extremity, mobility, or severe physical disabilities or spinal cord injury. FRAME: Six-wheel power base with a tight overall turning radius of 21.5 inches for accessability. CONTROLS: Fully programable MKIV-RII electronics for precise driver control. CWD: Center wheel drive. The center-wheel drive positions the drive wheels directly beneath the individual's center-of-gravity. SEAT: The v
Pronto M51 Power Wheelchair
The Invacare Pronto M51 Power Wheelchair is designed for use by individuals with lower extremity, mobility, or severe physical disabilities or spinal cord injury. FRAME (HxLxW): 35 to 37 x 34 to 40 x 24 inches. Power base with six wheels for stability and a tight overall turning radius of 21.5 inches for accessability. The chair comes in a choice of candy red or deep blue shroud colors.CONTROLS: Fully programable MKIV-RII electronics for precise driver control with an adjustable joystick mount.
Pronto M71 Power Wheelchair
The Invacare Pronto M51 Power Wheelchair is a powered wheelchair designed for use by individuals with lower extremity, mobility, or severe physical disabilities or spinal cord injury. FRAME: Disassembles without tools for transport. The chair is available in a choice of candy red, deep blue, or magic black shroud colors. CONTROLS: Fully programable MKIV-RII electronics with an adjustable joystick mount. CWD: The center-wheel drive positions the drive wheels directly beneath the individual's cent
Nutron R5I Power Wheelchair
The Nutron R5I Power Wheelchair is a powered wheelchair designed for use by individuals with severe physical disabilities. FRAME: Wet black oversized, high-strength tubular frame reinforced crossbrace frame folds to 13 inches for transport. . CONTROLS: Fully programmable MKIV -RII electronics. RWD: Rear-wheel drive. SEAT: Seat to floor height as low as 17.75 inches. Seat widths range from 14 to 20 inches and the depths range from 16 to 18 inches. The back height ranges from 16 to 19 inches. The
Nutron R5Ilx Power Wheelchair
The Nutron R5ILX Power Wheelchair is a powered wheelchair designed for use by individuals with severe physical disabilities. FRAME: Oversized, high-strength tubular frame with a reinforced crossbrace design that folds to 13 inches for transport. The chair is available in five colors. CONTROLS: Fully programmable MKIV -RII electronics. RWD: Rear-wheel drive. SEAT: Seat to floor height as low as 17.75 inches. Seat widths range from 14 inches to 20 inches and seat depths range from 16 inches to 18
Nutron R5Ilxp Power Wheelchair
The Nutron R5ILXP Power Wheelchair is a powered wheelcdhair designed for use by individuals with severe physical disabilities. FRAME: Oversize, high-strength tubular frame with reinforced crossbrace design that folds to 13 inches for transport. The nchair is available in five colors. CONTROLS: Fully programmable MKIV -RII electronics. RWD: Rear-wheel drive. SEAT: Seat to floor height as low as 17.75 inches. The seat width ranges from 14 to 20 inches and the depths range from 16 to 18 inches. T
Xlt Pro Handcycle
The XLT PRO Handcycle is a hand propelled cycle designed for use by adults with mobility or lower extremity disabilities or spinal cord injury who enjoy competitive cycling. This three-wheeled hand-crank cycle features STI-indexed shifters/brake levers for shifting and dual braking; fork steering; Shimano Ultegra/XT components and a road-crown compensator. Additional features include vertical ergonomic handgrips covered with delrim or foam and reflectors. FRAME: Lightweight, rigid 6061 TC alumin
Excelerator Xlt Handcycle
The Excelerator XLT Handcycle is a hand propelled cycle for adults with mobility disabilities. Capable of reaching speeds up to 20 miles per hour, this three-wheeled, hand-crank cycle features stable maneuverability for those who enjoy competitive cycling. With a Shimano 7-speed hub and reverse drum braking, this cycle can reach up to 24 different speeds. A fully adjustable chain tension idler lets the rider adjust the crank height without having to add or remove chain links. FRAME: Made of oval
Invacare Infinity Loback
The Invacare Infinity LoBack is a back support cushion designed for use in wheelchairs. This adjustable back cushion features integral lateral supports and provides support to the lower pelvis while supporting the upper body range of motion. OPTIONS: A range of accessories is available.
Invacare Envoy
The Invacare Envoy is a nebulizer designed for use by individuals with respiratory disabilities such as asthma. Designed for home or travel use, this lightweight unit creates a dense aerosol to deliver medication with maximum effectiveness with a flow rate of six liters per minute. A large storage compartment holds medication and the nebulizer mouthpiece. The set includes a Sidestream nebulizer mouthpiece and seven feet of tubing. POWER: Uses standard household current; the power cord stores in
Invacare Infinity Uniback & Invacare Infinity Uniback Foam-In-Place
The Invacare Infinity UniBack and the Invacare Infinity Uniback Foam-In-Place are back support cushions designed for use in wheelchairs. These cushions are single-panel back supports that offer economical versatility. Pelvic stabilizers and thoracic laterals are independently angle- and width-adjustable to accommodate a range of body shapes, as well as growth or change. OPTIONS: A range of accessories is available.
Invacare Infinity Drop Base
The Invacare Infinity Drop Base is a drop base for a wheelchair cushion designed for use by individuals who propell a wheelchair by foot or who require a lower seating position. This height-, angle-, and width-adjustable base enables the cushion to be dropped lower within the wheelchair frame than the standard seat. Quick-release hardware permits portability and provides secure attachment to most wheelchairs.
Invacare Reliant Bath Lift
The Invacare Reliant Bath Lift is a powered bath lift designed for use by individuals with mobility disabilities. Designed for use in most standard tubs, the unit is placed in the tub where specially designed suction cups secure the base; the seat is then attached and a push-button hand control raises the seat to the edge of the tub and lowers it into the tub. POWER: Uses a rechargable battery (included); the battery charger is also included. DIMENSIONS: Fits tubs up to 16.5 inches wide and with
Invacare Torque Sp
The Invacare Torque SP is a powered wheelchair designed for use by adults with mobility disabilities. FRAME (WxL): 24.75 x 32.25 inches. The chair is 34.25 inches high in the low configuration and 36.5 inches high in the medium configuration. The ground clearance is nearly five inches and the turning radius is 29.5 inches or less. Dynamic anti-tippers are included. CONTROLS: Mark IV RII joystick is included on the standard model and the Mark IV A joytick is standard with the weight limit upgr
Invacare Power Tiger With Orbit Seat
The Invacare Power Tiger with Orbit Seat is a child's powered wheelchair designed for use by children with mobility disabilities. FRAME:Available in a variety of colors, the frame disassembles for transport. The chair is 38 inches high and 22.25 inches wide (without the joystick). CONTROLS: Mark IV RX programmable controller with joystick. This controller has the capability for non-proportional driving for sip-and-puff and chin- or head-switch operation/digital driver inputs. Electronic communi
Bath Board
The Bath Board is a bathboard designed for use by individuals with mobility disabilities. This molded, contoured bathboard has a textured, non-slip surface and clamps to the edges of most standard tubs. An easy-to-use adjustment knob keeps the board secure. DIMENSIONS: Fits most standard tubs betwen 23.25 and 26.5 inches from edge to edge. The seating area is 31 inches wide x 15 inches deep. CAPACITY: 250 pounds. COLOR: White. WARRANTY: Limited Lifetime warranty.
Folding Shower Chair With Back
The Folding Shower Chair with Back is a shower stool designed for use by individuals with mobility disabilities. This molded chair has a wide contoured seat and folding back with drainage holes, molded hand-held shower holders, a folding aluminum frame, and non-marring rubber tips. DIMENSIONS (HxWxD): The seat is 17.5 x 19.75 x 17 inches. The back height is 12 inches high from the seat. Folded, the unit is 25.5 inches long x 19.75 inches wide x 7.5 inches deep. CAPACITY: 250 pounds. WEIGHT: 6.5
I-Class All-In-One Commode (Models 9630-1 & 9640-1)
The I-Class All-In-One Commode is a height adjustable commode designed for use by individuals with mobility disabilities. This three-in-one commode can be used as a safety frame, a raised toilet seat, and a stationary commode and features a tubular steel frame with removable backrest, a snap-on seat and lid, a splash shield, and molded armrests. A removable commode pail with a lid is included. The angled legs have rubber tips and seven height adjustments in one-inch increments. Anti-rattle colla
Drop-Arm Commode (Model 9669)
The Drop-Arm Commode, model 9669, is a height adjustable commode designed for use by individuals with mobility disabilities. This commode featuress a drop arm to facilitate transfers in confined areas; pushing a lever releases the arm and lifting the lever locks the arm in the upright position. Other standard features include a steel frame with integral backrest, height-adjustable angled legs with non-skid rubber tips, anti-rattle collars to reduce noise, molded armrest pads, snap-on seat and li
Invacare Clamp-On Raised Toilet Seat (Models 1391Ap & 1391P)
The Invacare Clamp-On Raised Toilet Seat, models 1391AP and 1391P, is a molded elevated toilet seat designed for use by individuals with arthritis or mobility disabilities. The unit fits over the toilet bowl, installs without tools, and features a clamp-on locking mechanism that can be tightened with one hand. Rear seat wings and non-skid pads provide additional security. Available with (1391AP) or without armrests (1391P), the unit has a contoured seat with a deep front recess for personal hygi
Invacare Tracer Sx
The Invacare Tracer SX is a manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with 14-gauge crossbraces. The frame is available in standard adult and hemi models. Push handles are standard. SEAT: Sling seat in a choice of 14, 16, 18, 20, or 22 inches wide. The standard seat depth is 16 inches; an 18-inch depth is available. The seat-to-floor height is available from 15.5 to 19.5 inches in one inch increments
Invacare Tracer Dlx
The Invacare Tracer DLX is a manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with 14-gauge crossbraces. The frame is available in standard adult and hemi models. Push handles are standard. SEAT: Sling seat in a choice of 16, 18, or 20 inches wide. The standard seat depth is 16 inches. The seat-to-floor height is available from 15.5 to 19.5 inches in one inch increments; 17.5 to 19.5 inches is standard and
Invacare Tracer Ex
The Invacare Tracer EX is a manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with 14-gauge crossbraces. Push handles are standard. SEAT: Sling seat in a choice of 16, 18, or 20 inches wide. The seat depth is 16 inches. The seat-to-floor height is 21 inches. The fixed back height is 16 inches. UPHOLSTERY: Flame-retardant dual-embossed vinyl upholstery in midnight blue or ruby with heavy-duty liners. ARMRESTS
Invacare 9000 Xt
The Invacare 9000 XT is a lightweight manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with crossbraces in a variety of colors. Push handles and anti-tips are standard. The frame is available in standard adult, hemi, and super hemi. SEAT: The seat is available in a choice of 14, 15, 16, 17, 18, 20 or 22 inches wide on the adult and hemi models and 14, 15, 16, 17, or 18 inches on the super-hemi model. The st
Invacare 9000 Xdt
The Invacare 9000 XDT is a manual adult wheelchair designed for use by tall and/or heavy individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with crossbraces in a variety of colors. Push handles are standard. The frame is available in tall, standard adult, and hemi. The standard frame color is chrome; cobalt blue, red, black, or silver vein are optional. SEAT: The seat is available in a choice of 16, 18, 20, or 22 inches wide. The standard seat depth is
Invacare 9000 Sl
The Invacare 9000 SL is a manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with crossbraces in a variety of colors. Push handles are standard. The standard frame color is chrome; options include deep purple, black, or silver vein. SEAT: The seat is available in a choice of 16, 18, or 20 inches wide. The standard seat depth is 16; 18 inches is optional. The standard seat-to-floor height is available in 17.5,
Invacare Mg
The Invacare MG is a manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with 16-gauge. Push handles are standard. The chrome frame is standard; black and silver vein are available. SEAT: The seat is available in a choice of 16 or 18 inches wide. The seat depth is 16 inches. The seat-to-floor height is 21 inches. The fixed back height is 16 inches. UPHOLSTERY: Flame-retardant vinyl upholstery in a choice of
Invacare Tracer Transport
The Invacare Tracer Transport is an attendant-propelled transport wheelchair designed for use by individuals with mobility disabilities. FRAME: Triple chrome-plated carbon-steel frame with crossbraces. Push handles are standard. SEAT: Sling seat in a choice of 14, 16, 18, or 20 inches wide. The seat depth is 16 inches. The seat-to-floor height is 21 inches. The back is available in a fixed or a fold-down model (the fold-down back is not avaiable with the 14-inch seat) and the height is 16 inche
Invacare Tracer Iv
The Invacare Tracer IV is a heavy-duty manual adult wheelchair designed for use by heavy individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with dual crossbraces. The reinforced frame includes gussetted side frame and caster journals. Push handles are standard. SEAT: Sling seat in a choice of 20, 22, or 24 inches wide. The seat depth is 18 inches. The seat-to-floor height is 21 inches. The fixed back height is 16 inches. UPHOLSTERY: Flame-retardant du
Invacare 9000 Xt Full Recliner
The Invacare 9000 XT is a reclining manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with crossbraces. The standard frame color is chrome; red, black, and silver vein are available. Push handles and anti-tips are standard. SEAT: The seat is available in a choice of 14, 16, 18, 20 or 22 inches wide. The standard seat depth is 16 inches; 18 inches is optional. The standard seat-to-floor height is 19.5 inches
Invacare Tracer Sx Recliner
The Invacare Tracer SX is a reclining manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Triple chrome-plated carbon-steel frame with crossbraces. Push handles and anti-tips are standard. SEAT: The seat is available in a choice of 14, 16, 18, 20 or 22 inches wide on standard and hemi frames. The standard seat depth is 16 inches; 18 inches is optional. The standard seat-to-floor height is 19.5 inches. The back height is 23 inches with the removable 10-inch
Invacare Ramps (Models Icr630 & Icr330)
The Invacare Ramps are suitcase-style portable ramps designed for use with manual and power wheelchairs and three- and four-wheel scooters. Both models fold and feature a slide-on clip and carrying handle for secure storageand transport. Model ICR330 is a single-fold model and model ICR630 is a multi-fold model. High traction tape on the surface of both models is long-lasting and maintenance-free. DIMENSIONS: Open, model ICR630 is 6 feet long x 30 inches wide and model ICR330 is 3 feet long x 3
Invacare A6 / F6
The Invacare A6/F6 is a lightweight manual sport wheelchair designed for use by individuals with mobility disabilities. FRAME: Rigid frame in a variety of colors. Both models feature a telescoping wheelbase which enables the chairs to be set up for maximum stability for first-time users or for maximum performance. SEAT: The A6 has an adjustable seat angle and the F6 has a fixed seat angle. The seat widths and depths are available from 14 to 20 inches in one-inch increments. The seat-to-floor hei
Invacare A-6S / F-6S
The Invacare A-6S/F-6S is a lightweight manual sport wheelchair designed for use by individuals with mobility disabilities. FRAME: Rigid frame in a variety of colors with dual rear and front customizable suspension. Both models feature a telescoping wheelbase which enables the chairs to be set up for maximum stability for first-time users or for maximum performance. SEAT: The A-6S has an adjustable seat angle and the F-6S has a fixed seat angle. The seat widths are available from 12 to 20 inches
Invacare Action P7E
The Invacare Action P7E is a powered wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding frame in a choice of electric red, electric blue, wet black or evergreen with navy. The chair folds to 13.75 inches wide including the joystick. Open, the chair is 23.25 to 25.25 inches wide x 41.75 to 43.75 inches long x 37 inches high. The turning radius is 34.5 inches. CONTROLS: Accessible on/off toggle switch and Mark IV sized- and styled-joystick with programmable thro
Invacare Excel Front Wheel Drive
The Invacare Excel Front Wheel Drive is a powered wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding frame folds to 14 inches wide including the joystick. Open, the chair is 26.25 inches wide x 32.5 to 39 inches long x 34 to 38.5 inches high. The full turning radius is less than 26 inches. Ground clearance is four inches. CONTROLS: Mark IV sized- and styled-joystick with programmable throw is permanently attached. This chair includes Action Virtual Service tha
Invacare Excel Front Wheel Drive With Captain Seat
The Invacare Excel Front Wheel Drive with Captain Seat is a powered wheelchair designed for use by individuals with mobility disabilities. FRAME:This chair disassembles and folds for transport. Open, the chair is 24.75 inches wide x 43.5 inches deep x 35 to 39 inches high. The full turning radius is less than 25 inches. Ground clearance is four inches. The shroud is available in liquid black, candy apple red, ocean blue, or emerald green. CONTROLS: Mark IV sized- and styled-joystick with progr
3-Inch Swivel Wheels With 13-Inch Rear Leg Extensions With Glide Tips (Model 6269), 3-Inch Swivel Wheels With 13-Inch Cambered Sure Glide Brakes (Model 6272) & 3-Inch Swivel Wheels Attachments With Rear Glide Tips (Model 6273)
The 3-inch Swivel Wheels with 13-inch Cambered Sure Glide Brakes, model 6272, are wheeled leg attachments for walkers designed to convert standard walkers to wheeled walkers. This set includes front swivel wheel attachments and rear leg attachments with cambered brakes. The 3-inch Swivel Wheels Attachments with Rear Leg Extensions with Glide Tips, model 6269, has the front swivel wheels attachments, rear leg extensions, and glide tips to replace the standard tips on the rear walker legs. The 3-i
Tall Leg Extensions (Model 6275) & 13-Inch Rear Leg Extensions With Glide Tips (Model 6266)
The Tall Leg Extensions, model 6275, and the 13-inch Rear Leg Extensions, model 6266, are leg extensions for walkers designed to convert standard-height walkers to walkers designed for use by individuals up to 6 feet, 6 inches tall. Model 6275 is intended for use with standard walkers without wheels and model 6266 is designed for use on walkers with fixed or swivel front wheels and includes glide tips.
Cambered Sure Glide Brakes (Models 6274 & 6263)
The Cambered Sure Glide Brakes are rear brake attachments designed for use with 3- or 5-inch single fixed wheel attachments (sold separately). These brakes operate without interfering with the normal use of the walker. DIMENSIONS: Model 6274 are 10-inch extensions and model 6263 are 13-inch extensions.
Rear Wheel Brakes (Models 6264 & 6265)
The Rear Wheel Brakes are rear brake attachments for walkers designed for use with 3- or 5-inch wheel attachments (sold separately). Model 6264 is intended for use with single fixed wheel attachments and model 6265 is intended for use with swivel wheel or Tall Fixed Wheel attachments (not included). Both models are combination brakes and small wheels. These brakes operate without interfering with the normal use of the walker. DIMENSIONS: Model 6264 are 10-inch extensions and model 6265 are 13-i
Walker Basket (Model 6098)
The Walker Basket, model 6098, is a wire basket for a walker designed to provide carrying capability for individuals with mobility disabilities. This vinyl-coated wire basket mounts to the front crossbar of the walker with snap hooks and can be installed on the inside or the outside of the walker. COLOR: Grey. WARRANTY: Limited lifetime warranty.
Walker Tray (Model 6007)
The Walker Tray, model 6007, is a tray for a walker designed to provide carrying capability for individuals with mobility disabilities. This molded plastic tray features raised edges, cup and pen holders, and rounded corners. The tray clips to the crossbar of the walker, folds down and out of the way when not in use, and supports up to five pounds. WARRANTY: One-year limited warranty.
Walker Pouch (Model 6015-4)
The Walker Pouch, model 6015-4, is a carrying bag for a walker designed to provide carrying capability for individuals with mobility disabilities. Designed to fit adult walkers, this pouch is made of lightweight, water-repellent denier nylon with urethane-coated backing. This bag attaches over the front crossbar of the walker and features an inner and an outer pocket. COLOR: Forest green and deep blue sea combination. WARRANTY: One-year limited warranty.
Standard Crook Cane
The Standard Crook Cane is an adjustable cane designed for use by individuals with mobility disabilities. Available in adult models and a junior model, these straight canes have aluminum shafts,a wide standard crook handle, locking adjustment collars to secure the cane at the desired length, and rubber tips reinforced with a metal insert. The adult models are available with a choice of the triangular, flat-topped Invacare grip or a cushioned foam grip. The junior model is available with the foam
Modified Crook Cane
The Modified Crook Cane is an adjustable cane designed for use by individuals with mobility disabilities. This straight cane has a slight bend at the bottom of the crook to create a slightly offset grip, an aluminum shaft, a locking adjustment collar to secure the cane at the desired length, and a rubber tip reinforced with a metal insert. The cane is available with a choice of the Invacare triangular grip with a flattened top or a cushioned foam frip. DIMENSIONS: This cane adjusts from 29 to 38
Offset Cane
The Offset Cane is an adjustable cane designed for use by individuals with mobility disabilities. This height-adjustable cane has an offset handle, an aluminum shaft, a locking adjustment collar to secure the cane at the desired length, and rubber tips reinforced with a metal insert. This cane is available with a choice of the triangular Invacare grip with the flat top or the dual-cam grip with a form-fitting gripping area. DIMENSIONS: Adjusts from 29 to 38 inches tall. CAPACITY:250 pounds. WEIG
Custom Fit Aluminum Cane
The Custom Fit Aluminum Cane is an adjustable cane designed for use by individuals with mobility disabilities. This cane can be cut to fit the needs of the user and features a choice a standard crook or offset handle, a foam grip, and a rubber tip with metal reinforcement. CAPACITY: 250 pounds. WEIGHT: 13 ounces. COLOR: Silver. WARRANTY: Limited lifetime warranty.
Orthopedic Grip Canes (Model 8928 & 8929)
The Orthopedic Grip Canes are adjustable canes designed for use by individuals with mobility disabilities. These canes feature a unique ergonomically shaped grip to spread pressure evenly over the palm, an aluminum shaft, a horseshoe clip for adjustment, and a rubber tip. Model 8928 is a left-handed cane and model 8929 is a right-handed cane. DIMENSIONS: The height adjusts from 31 to 40 inches. CAPACITY: 250 pounds. WEIGHT: 15 ounces. COLOR: Black. WARRANTY: Three-year limited warranty.
Wooden Cane
The Wooden Cane is a straight cane designed for use by individuals with mobility disabilities. This traditional-style cane is made of walnut and features a crrok handle and a chip- and mar-resistant finish. DIMENSIONS: One inch in diameter. COLOR: Walnut.
Medium Base Quad Cane (Models 3920-2 & 7823)
The Medium Base Quad Cane is an adjustable-height quad cane designed for use by individuals with mobility disabilities. Both models feature aluminum shafts, locking height adjustment, and a metal quad base with rubber tips. Model 3920-2 has the Invacare triangular grip with the flat top and model 7823 has a dual-cam grip with a flattened top and a form-fitted gripping area. DIMENSIONS: The height adjusts from 26.5 to 36.25 inches on model 3920-2 and from 26.5 inches to 36.5 inches on model 7823.
Large Base Quad Cane (Models 7827 & 7829)
The Large Base Quad Cane is an adjustable-height quad cane designed for use by individuals with mobility disabilities. Both models feature aluminum shafts, locking height adjustment, and a metal quad base with rubber tips. Model 7827 has the Invacare triangular grip with the flat top and model 7829 has a dual-cam grip with a flattened top and a form-fitted gripping area. DIMENSIONS: The height adjusts from 27.25 inches to 37.25 inches on both models. The base on both models is 13 x 7.75 inches
Cane Tips (Models 40850-4, 40851-4, 40852-4 & 40853-4)
The Cane Tips are designed to replace the existing tips on straight, offset, and quad canes. These rubber tips have metal reinforcements. DIMENSIONS: Model 40850-4 fits canes 1 inch in diameter. Model 40851-4 fits canes 7/8 inch in diameter. Model 40852-4 fits canes .75 inch in diameter. Model 40853-4 fits canes 5/8 inch in diameter. COLOR: Black.
Quick-Change Crutches (Models 8115-J, 8115-A, & 8115-T)
Quick-Change Crutches are axillary crutches designed for use by individuals with mobility disabilities. These lightweight anodized aluminum crutches have a one-piece frame, push-button height adjustment, and contoured non-rotating handgrips. SIZES: Model 8115-J is a junior model designed for individuals from 4 feet, 7 inches tall to 5 feet, 3 inches tall. Model 8115-A is a standard adult model for individuals 5 feet, 2 inches tall to 5 feet, 10 inches tall. Model 8115-T is a tall adult model for
Forearm Crutches (Models 6152, 6153, & 6154)
The Forearm Crutches are forearm crutches designed for use by individuals with mobility disabilities. These vinyl-coated, height-adjustable aluminum crutches have solid aluminum cuffs, cushioned vinyl handgrips, and extra-large crutch tips. SIZES: Model 6152 is a junior model designed for individuals from 4 feet, 7 inches tall to 5 feet, 3 inches tall. Model 6153 is a standard adult model for individuals 5 feet, 2 inches tall to 5 feet, 10 inches tall. Model 6154 is a tall adult model for indivi
Rubber Crutch Tips (Models 5134 & 5135)
The Rubber Crutch Tips are designed for use with axillary and forearm crutches. These rubber tips help grip the surface and absorb shock and are reinforced with metal inserts. SIZES: Model 5134 is large and model 5135 is extra large. DIMENSIONS: Model 5134 has a 1.75-inch opening diameter and model 5135 has an opening diameter of 2 inches.
Arm Pads (Model 6131)
Arm Pads, model 6131, are crutch underarm cushions designed for use with axillary crutches. These rubber pads fit wooden and aluminum crutches. COLOR: Gray.
Hand Grips (Models 5126 & 5119)
The Hand Grips are crutch handgrips designed for use with axillary crutches. These contoured grips will not rotate and are padded for comfort. Model 5126 is a solid hand grip and model 5119 is an open hangrip to wrap around the ctuch hand hold.
Stargazer (Model 65600)
The Stargazer, model 65600, is folding wheeled walker with a seat designed for use by individuals with mobility disabilities. This four-wheel foding steel walker features a locking mechanism to prevent accidental folding. Other standard features include a built-in handle to assist with folding and storage; a solid seat with a removable clear tray and a soft, flexible backrest;ergonomic handbrakes to lock the rear wheels; a removable basket; and solid rubber tires. The handle and seat heights ar
Stingray Four-Wheel Rollator (Model 65500)
The Stingray Four-Wheel Rollator, model 65500, is a folding wheeled walker with a seat designed for use by individuals with mobility disabilities. This four-wheel folding steel walker features a locking mechanism to prevent accidental folding. Other standard features include a built-in handle to assist with folding and storage; a solid seat with a removable clear tray and a soft,flexible backrest;ergonomic handbrakes to lock the rear wheels; a removable basket; and solid rubber tires. The handle
Spartan (Model 65420)
The Spartan, model 65420, is folding wheeled walker with a seat designed for use by individuals with mobility disabilities. This four-wheel foding steel walker features a locking mechanism to prevent accidental folding. Other standard features include a built-in handle to assist with folding and storage; a solid seat with a removable clear tray;ergonomic handbrakes to lock the rear wheels; a removable basket; and polyurethane tires. The handle height is adjustable. DIMENSIONS (WxD): This walker
Sprint Three-Wheel Rollator (Model 65400)
The Sprint Three-Wheel Rollator, model 65400, is a folding wheeled walker designed for use by individuals with mobility disabilities. This three-wheel folding steel walker features a locking mechanism to prevent accidental folding. Other standard features include a built-in handle to assist with folding and storage;ergonomic handbrakes to lock the rear wheels; and polyurethane tires. The handle height is adjustable. OPTIONS: Removable basket and tray. DIMENSIONS (LxW): This walker is 28 x 23 inc
I-Class Heavy-Duty Transfer Bench
The I-Class Heavy-duty Transfer Bench is designed for use by individuals with mobility disabilities while bathing. This height-adjustable bench has an anodized aluminum frame with nine height adjustments in one-half-inch increments; non-slip, non-marring rubber tips; a shower curtain opening; built-in soap dish and hand-held shower holder; and an aluminum arm rail. The one-piece blow-molded seat is textured for a non-slip finish and has drain holes. The molded, ergonomically-shaped backrest snap
Ensolite Padded Transfer Bench
The Ensolite Padded Transfer Bench is designed for use by individuals with mobility disabilities while bathing. This height-adjustable bench has an anodized aluminum frame with nine height adjustments in one-half-inch increments; non-slip, non-marring rubber tips; and an aluminum arm rail. The back and seat are padded with closed-cell, water repellent Ensolite foam for a seamless, cushioned seating surface. OPTIONS: A commode seat with container and leg pieces with suction cups are available. DI
Careguard By Invacare Transfer Bench
The CareGuard by Invacare Transfer Bench is designed for use by individuals with mobility disabilities while bathing. This height-adjustable bench has an anodized aluminum frame with nine height adjustments in one-half-inch increments; non-slip, non-marring rubber tips; and an aluminum arm rail. The back and the three-section seat are blow molded and the seat has a non-slip textured seat with drain holes. OPTIONS: Leg pieces with suction cups are available. DIMENSIONS: The frame tubing is one-i
Vinyl Padded Transfer Bench
The Vinyl Padded Transfer Bench is designed for use by individuals with mobility disabilities while bathing. This height-adjustable bench has an anodized aluminum frame with nine height adjustments in one-half-inch increments; non-slip, non-marring rubber tips; and an aluminum arm rail. The vinyl seat and back are padded with open-cell foam for comfort. OPTIONS: Leg pieces with suction cups and a commode seat with container are available. DIMENSIONS: The frame tubing is one-inch in diameter. The
Heavy-Duty Commode (Model 6496S)
The Heavy-Duty Commode, model 6496S, is a height-adjustable commode designed for bedside usre by individuals with mobility disabilities. This commode has a heavy-duty, height-adjustable steel frame, molded armrest pads, a snap on seat with a lid, and a plastic bucket that slides inder the seat. DIMENSIONS: The distance between the armrests is 23.5 inches and the seat is 16 inches wide. The height adjusts from 18.75 to 22.75 inches. CAPACITY: 450 pounds.
Invacare Infinity Dualflex Back
The Invacare Infinity DualFlex Backis a back support cushion designed for use in wheelchairs. A biangular flex hinge between the thoracic and sacral support panels provides precise adjustment of the back support shape. This allows for natural thoracic extension and balancing for users who require a higher level of back support. The dynamic flex feature also provides ease of upper body mobility as well as support and pelvic stability. OPTIONS: A range of accessories is available.
Invacare Contouru
The Invacare ContourU is a molded seating system kit designed for use in wheelchairs. These seat and back cushions are made by utilizing a simulator and molding bags to capture the shape of the individual. This system provides optimum positioning while accommodating complex orthopedic deformities and tone. Support surfaces are built into the cushion and multiple finshing options, including naked foam with removable cocver, vacuformed vinyl, pelvic strap notches, and undercuts are available.
Bellaire With Lumbar Support
The Bellaire with Lumbar Support is a seat lift recliner chair designed for use by individuals with mobility disabilities. This motorized chair has a hardwood frame; a welded steel base; heavy-gauge, no-sag steel springs in the seat and back; dacron fibers in the arms, back, and chaise for shape retention; and a cushioned seat for comfort and support. Covered in acrylic Wear-Dated fabric, this chair also features Scotchgard fabric protection, dual magazine pockets, adjustable lumbar support, tri
Murphy
The Murphy is a seat lift recliner chair designed for use by individuals with mobility disabilities. This motorized chair has a hardwood frame; a welded steel base; heavy-gauge, no-sag steel springs in the seat and back; dacron fibers in the arms, back, and chaise for shape retention; and a cushioned seat for comfort and support. Covered in acrylic and Olefin fabric, this chair also features traditional styling with a 10-button chair back design. In addition to the lift-out feature, this chair o
Fairview
The Fairview is a seat lift recliner chair designed for use by individuals with mobility disabilities. This motorized chair has a hardwood frame; a welded steel base; heavy-gauge, no-sag steel springs in the seat and back; dacron fibers in the arms, back, and chaise for shape retention; and a cushioned seat for comfort and support. Covered in acrylic, polyester, and Olefin fabric, this chair also features traditional styling with a tufted chair back design, arm covers, and a magazine pocket on t
Invacare Comfort-Mate Extra Cushion And Base
The Invacare Comfort-Mate Extra Cushion and Base is a foam seat cushion designed for use with wheelchairs. This contoured, lower-profile cushion has two layers of high-density molded foam for stability and pelvic support. Beveled sides enable the cushion to be used with a drop base. This cushion has a waterproof coating and comes with a waterproof cover with a non-slip bottom. OPTIONS: This cushion can be ordered with a built-in drop base which allows lower seat-to-floor heights to facilitate fo
Invacare Absolute & Invacare Single-Density Cushion
The Invacare Absolute is a foam seat cushion designed for use with wheelchairs. This dual-firmness cushion features firmer foam under the thighs and hips and softer foam under the ischials for good weight distribution and comfort. The Invacare single-density cushion is an economy version of this comfort cushion and is available in more than 100 non-standard sizes.
Invacare Personal Seat With Cushion Rigidizer
The Invacare Personal Seat with Cushion Rigidizer is a gel and foam seat cushion designed for use with wheelchairs. This lightweight, contoured cushion uses a combination of foam and fluid for pelvic stability and pressure relief. A slim profile Cushion Rigidizer reduces hammocking and provides a firm, stable base of support.
Invacare Curved Back & Invacare Pneumatic Curved Back
The Invacare Curved Back is a back support cushion for use with wheelchairs. Designed for users who require a solid back support, it features both comfort and visco-elastic foam and a built-in sacral positioning pad. The Invacare Pneumatic Curved Back includes a pneumatic lumbar support bladder. OPTIONS: Lateral supports, neck supports, and shoulder supports.
Invacare S-Back
The Invacare S-Back is a back support cushion designed for use with wheelchairs. This system adjusts to the shape of the user's spine with the turn of a knob and the curve can be adjusted throughout the day for different activities. Special mounting clips enable this support to be attached and removed from sling upholstery and permit height adjustment.
Invacare Personal Back & Personal Back Plus
The Invacare Personal Back is a back support cushion designed for use with wheelchairs. This lightweight back support provides comfort and positioning with built-in lumbar and lateral supports. The Personal Back Plus offers the same features plus increased lateral depth for additional stability and support. The back can be mounted in front of or behind the rear canes or at a reclined angle.
Invacare Ulti-Mate Air & Ulti-Mate Air Pneumatic
The Invacare Ulti-Mate Air is a back supportcushion designed for use with wheelchairs. This back is anthropometrically contoured to promote good support and positioning of the spine. The seat-to-back angle can be adjusted from 90 to 115 degrees of recline. Quick-release hardware allows easy installation and portability. The Ultimate-Air Pneumatic also has a pneumatic lateral support.
Invacare Kinesthetic Seating System (Kss) And The Invacare Kinesthetic Seating System Deluxe
The Invacare Kinsthethetic Seating System is a modular seating system designed for use with wheelchairs. This fully-adjustable system provides a personalized fit and accommodates growth. The system includes the Invacare Curved Back, the Invacare Ulti-Mate (also sold separately; see separate entries), basic headrest, fixed lateral support, padded lap belt, fixed growth bracket, and mounting hardware. The Deluxe system includes the components of the basic system plus swing-away lateral supports an
Invacare Silhouette
The Invacare Silhouette is a molded seating system kit designed for use in wheelchairs. This seating system is created by utilizing shape-sensor technology to capture the precise shape of the user's body. Computer-assisted manufacturing produces a custom-contoured cushion in a choice of soft or firm foam for maximum pressure reduction and stability.
I-Class Dual-Release Wakers (Models 6291-1 & 6291-Jr)
The I-Class Wakers are folding height-adjustable walkiers designed for use by children and adults with mobility disabilities. These lighter weight walkers feature composite lower side braces for stability, anti-rattle sliencers, PVC hand grips, and rubber tips on the legs. The dual-release folding mechanism features nylon paddles that pop up when the walker opens; pressing down on each paddle aqllows the sides to be folded. These walkers accommodate individuals from four feet four inches tall t
Invacare Wheeled Walkers
The Invacare Wheeled Walkers designed for use by children and adults with mobility disabilities. These lighter weight walkers feature composite lower side braces for stability, anti-rattle sliencers, PVC hand grips, and rubber tips on the rear legs. The front legs are equipped with a choice of 3- or 5-inch wheels with glide tips. The adult models are available with a choice of single- or dual-release folding mechanisms. The Junior model features a dual-release folding mechanism. These walkers ac
Invacare Single-Release Walkers
The Invacare Single-release Walkers designed for use by children and adults with mobility disabilities. These lighter weight walkers feature composite lower side braces for stability, anti-rattle sliencers, PVC hand grips, and rubber tips on the legs. Available in adult and junior models, the walkers feature a single release button at the center of the top cross bar which enables the user to be closed with one hand. The button provides both visible and audible "locked" cues. These walkers accomm
Invacare Heavy Duty Walker (Model 6291-Hda)
The Invacare Heavy Duty Walker, model 6291-HDA, is a folding adjustable walker designed for use by heavy adults with mobility disabilities. These lighter weight walkers feature composite lower side braces for stability, anti-rattle sliencers, PVC hand grips, and rubber tips on the legs. The dual locking mechanism features nylon paddle locks which pop up when the walker is opened; pressing down on each paddle enables the corresponding side to be folded. This walker accommodates adults from 5 feet
Platform Attachment (Model 6027)
The Platform Attachment, model 6027, is a platform forearm attachment for a walker designed to enable individuals with upper extremity and mobility disabilities to use walkers. These height-adjustable platforms install without tools and feature a thick, vinyl-covered arm pad with a heavy-duty Velcro strap and a padded hand grip. WARRANTY: Limited lifetime warranty.
3-Inch Single Fixed Wheel Attachments With Rear Glide Tips (Model 6270) & 5-Inch Single Fixed Wheel Attachments With Rear Glide Tips (Model 6271)
The 3-inch Single Fixed Wheel Attachments with Rear Glide Tips, model 6270, and the The 5-inch Single Fixed Wheel Attachments with Rear Glide Tips, model 6271, are wheeled leg attachments for walkers designed to convert standard walkers to wheeled walkers. Both models fit Invacare walkers and have easy-to-clean polypropylene wheel rims and non-marring thermoplastic rubber tires. The wheels and bearings are corrosion protected. WARRANTY: Limited lifetime warranty.
Tall 3-Inch Single Fixed Wheel Attachments With Tall Rear Legs And Glide Tips (Models 6277 & 6278)
The Tall 3-inch Single Fixed Wheel Attachments with Tall Rear Legs and Glide Tips are wheeled leg attachments for walkers designed to convert standard Invacare walkers to wheeled walkers for use by individuals up to 6 feet, 6 inches tall. Both models have easy-to-clean polypropylene wheel rims and non-marring thermoplastic rubber tires. The wheels and bearings are corrosion protected. DIMENSIONS: Model 6277 includes 10-inch rear leg extensions and model 6278 includes 13-inch rear leg extensions.
5-Inch Swivel Wheels With 13-Inch Cambered Sure Glide Brakes (Model 6268) & 5-Inch Swivel Wheels Attachments With Rear Glide Tips (Model 6267)
The 5-inch Swivel Wheels with 13-inch Cambered Sure Glide Brakes, model 6268, are wheeled leg attachments for walkers designed to convert standard walkers to wheeled walkers. This set includes front swivel wheel attachments and rear leg attachments with cambered brakes. The 5-inch Swivel Wheels Attachments with Rear Glide Tips, model 6267, has the front swivel wheels attachments and glide tips to replace the standard tips on the rear walker legs. Both models fit Invacare walkers and have easy-to
Orbit Tilt-In-Space Wheelchair
The Orbit Tilt-In-Space Wheelchair is a child tilt-in-space wheelchair designed to meet a variety of positioning needs. FRAME: Modular lightweight frame designed to accommodates a child's growth. The frame expands from 10 x 10 inches to 16 x 16 inches in one-inch increments. The chair disassembles for storage and transport. SEAT: Detachable seat. The seat is interchangeable with others in the line, allowing for seats to be changed with growth or with change in need. The seat height is adjustable
A4
The A4 is a lightweight wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Lightweight frame with an overall width of 18.75 to 36.5 inches. Features include a curved back frame and a camber tube clamp assembly that allows adustment of the center-of-gravity in an infinite number of settings. A full suspension is available as an option. SEAT: Available with seat widths of 12 to 22 inches and seat depths of 14 to 22 inches. The rear seat-to-floor hei
Invacare Patriot
The Invacare Patriot is a lightweight manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Lightweight folding frame in a variety of colors. Push handles are standard. A built-in amputee attachment provides an amputee setting. SEAT: The seat width is available in 14, 16, 17, 18, or 20 inches. The seat depth is offered in 16 or 18 inches. The seat-to-floor height is available in adult, hemi, and factory-set super hemi. The standard seat-to-floor heights are
Top End T-3
The Top End T-3 is a three-wheel sports wheelchair designed to provide increased maneuverability to wheelchair athletes for sports such as basketball and tennis. FRAME: Made from 6061 T6 aluminum, the frame is available with an open T-frame for wheelchair tennis or a basketball frame, which features an additional tubular, U-shaped leg guard. The frame is available in 30 standard Imron colors, or in optional neon, splatter, candy, or two-tone non-neon colors. SEAT: Bucket-style standard; adjustab
Pro-Cycle & Jr. Pro-Cycle
The Pro-Cycle is a hand propelled three-wheeled cycle for adults and youth. FRAME: The chrome-moly tubular frame is custom built to the overall height of the user and ranges from 30 inches to approximately 38 inches to suit riders 4 feet to over 6 feet. The wheelbase is 30 to 38 inches and frame length is available in 30, 33, 35 or 38 inches. The frame is available in a an array of standard and custom colors. Contact manufacturer for a Color Selection Guide. SEAT: The chair style seat includes a
Dukki Shower And Toilet Chair
Adjustable child's chair for personal hygiene. Molded polyethylene. Seat has rounded corners for eliminating dirt collection. Rust proof aluminum base. Height adjustable for easy access to toilet, sink, or table. Tilting seat control up to 60 degrees backwards for shampooing. 5 degree maximum forward tilt. Locking wheels. Interlocking armrest tray and abduction block for positioning. Abduction block directs male's urine flow. Adjustable footrest. Disassembles for traveling. Optional chest, pelvi
Forearm Cane (Model 6814)
Padded forearm trough mounted on an aluminum upright with safety rubber tip. Adjustable Velcro fastener for securing forearm to trough. Contour vertical handgrip adjusts forward or backward and rotates. Height adjustable with pushbutton. No height given.
Smartleg.
Elevating legrest that extends 3 to 5 inches when elevated. Fits any adult wheelchair from Invacare. Can be lengthened from 16 to 20 inches. Weight, 12 pounds per pair.
Fitness Is For Everyone.
Video exercise tapes for the physically impaired. Each 30 minute aerobic dance routine program includes a warmup period, activity period, and cool down period. Choose from sets or individual selections: Aerobics for paraplegia, quadriplegia, cerebral palsy, amputees; Strength and flexibility exercises for all types of disabilities; Aerobics for paraplegia and quadriplegia; Aerobics for Cerebral Palsy and amputees; Aerobics for paraplegia; Aerobics for quadriplegia; Aerobics for amputees; or Aero
Portable Patient Lifts (9800 Series)
The Portable Patient Lifts, models 9805, 9806, and 9807 are hydraulic transfer lifts designed to eliminate manual transfers for individuals with limited mobility and strength. The lift supports patients with maximum comfort and prevents unnecessary stress on the caregiver's back. The 9800 Series is designed with an adjustable locking base with three interchangeable base models. A padded swivel bar has a six point hook-up that adapts to all sling styles and positioning requirements. The color cod
Wheeled Walker With Hand Brakes (Model 6206)
Hand operated brakes attach to wheel to prevent movement. Brake handle is attached to handrail and is operated by downward pressure. May be installed on any Invacare walker.
Balance Ring Attachment (Model 6068)
Metal body support ring covered with foam padding and Naugahyde. Opens for entry or exit. Adult ring size 14 1/2 by 17 1/2 inches, height adjusts 12 inches. Junior ring size 12 1/2 by 10 1/2 inches, height adjusts 8 inches. No further description given.
Invacare Mvp
The Invacare MVP is a lightweight manual wheelchair designed for everyday use by people with mobility disabilities. FRAME: Two-part folding aluminum frame with a swing-away or fixed front frame and curved, square or extended (growth) frame. The frame is available in 20 colors at no additional charge. Widths range from 25 to 32 inches. A 10-degree bend back with push handles is standard; sportster and fixed back heights (12, 14, 16 and 18 inches) options with no push handles or straight push hand
Drop Arm Commode (Models 6352 & 6254)
Chrome plated steel, plastic molded back support and open front seat with cover. Arms drop down by pivoting on hinge at back post, pull spring release, or lever release available. Casters or rubber tips available. Seat width 19 inches, overall width 24 inches. Seat height 19 to 23 inches.
Offset Trapeze (Model 7740)
Frame is 1 1/4 inch octagon steel tube, chrome plated. 5 foot rise and 34 inch reach. Offset design clears wall mounted fixtures above bed. Clamps fit any tubular or solid end beds. Fixed or swivel mount, and heavy duty models are available from manufacturer.
Trapeze With Floor Base (Model 7714)
Floor base for fixed trapeze bars provides free standing support for bar. Octagonal steel tubing. Offset fixed trapeze unit. Base length 40 inches, height 38 inches, width 32 inches or 4 inches folded, weight 24 pounds.
Easy Adjust Overbed Table (Model 6411)
Chrome plated square tubular leg and base, 4 casters. Spring tension height adjustment with positive corner lock, 27 to 44 high. Table surface, 15 by 30 inches. Tilts either direction, plunger release lock, 5 positions.
All Purpose Narrow Base Quad Cane (Model 6825)
Narrow based adjustable height 4 legged cane with straight shaft shovel type handle. Rubber safety tips. Base is 7 by 8 1/2 inches. Height adjustment is a double locking clamp. Adjustable height from 29 to 38 inches.
Folding Pick Up Walker (Model 6250) & Children's Folding Pick Up Walker (Model 6251)
Pushbutton height adjustable four legged frame. Extra cross bar on upper frame telescopes when spring button release is activated to allow sides to fold to compact 4 inch width for storage. Vinyl hand grips, rubber safety tips. Weight 5 pounds. Base 16 by 19 1/2 inches. Adult height 32 to 36 inches, children height 28 to 32 inches.
Rigid Walker (Model 6280)
Pushbutton height adjustable four legged frame. Height adjusts 32 to 36 inches. Base 19 1/2 by 16 inches. Weight 5 pounds. Vinyl handgrips, rubber safety tips. High cross bar for over toilet use or swing through leg action. Comes unassembled from manufacturer. Assemble by 4 bolts and lock nuts.
Mechanical Shape Sensor (Mss)
Seating simulator for persons needing a custom contoured seat cushion. Mechanical shape sensor measures resistance to weight at 100 separate points across the seat surface. Independent sensors at each point record the depth of contour. Readings are imprinted on paper in a simple dot pattern, which can be mailed or faxed to the manufacturer. The dot pattern is then electronically scanned and digitized to recreate a three dimensional picture which is used for carving a customized foam cushion.
Ulti-Mate Cushion
The Ulti-mate Cushion is a foam seat cushion designed for use with wheelchairs. This cushion features built-in pre-ischial bar to transfer weight from ischial region to posterior thigh, lateral bevels on underside of cushion to accommodate the sling of the wheelchair for optimal base of support, and built-in leg channels to promote neutral leg position and help stabilize upper body. The cushion uses a combination of foams which adjust to different body weights and sizes, including a top layer of
Clinic Model Wide Base (Model 6827)
Wide based adjustable height four legged cane with straight shaft shovel type handle. Rubber safety tips. Base is 9 by 12 inches. Height adjustment is a double locking clamp. Adjustable height from 30 to 39 inches.
Paxbac
PaxBac is a wheelchair back support designed to promote a more upright posture and to provide the proper amount of back support for wheelchair users with sling-back chairs. Made of molded foam, the unit fastens to the back of most sling back chairs with built-in attachment hooks. A tension strap allows the user to increase or decrease the amount of support provided to meet the differing needs of various activities. A loop handle on the tension strap enables the user to make adjustments while rem
Eliminator & Eliminator X
The Top End Eliminator and the Eliminator X are racing wheelchairs that are designed with aerodynamic frames and lower center of gravity for athletic individuals who use a wheelchair and wish to compete. Each bike comes standard with a helmet and tool kit. FRAME: The frame is made of custom 6061 T6 Aluminum T-frame. There are three cage designs: V, open-V, ar I-cage. The Eliminator X has a one-sided triagular fork. Overall length measures 56 to 66 inches in two inch increments. STEERING: Custom
Excelerator Handcycle
The Excelerator Handcycle is a hand propelled cycle for adults with mobility or lower extremity disabilities or spinal cord injury. Capable of reaching speeds up to 30 miles per hour (mph), this three-wheeled, hand-crank cycle features stable maneuverability and is a way to exercise or cross-train. Super-7 shifters are positioned for easy accessibility and the Sachs Super-7 hub, with reverse braking, lets the user back up without taking his/her hands off the handles to stop or find a neutral zon
Li'l Excelerator Handcycle
The Li'l Excelerator Handcycle is a hand propelled cycle for younger riders with mobility or lower extremity disabilities or spinal cord injury. Designed for children aged five to fifteen or small adults and 48 to 62 inches tall, this lightweight, three-wheeled cycle has a 7-speed hub with reverse braking, enabling the user's hands to remain on the cranks. And, with fully adjustable chain tension idler, there is no need to add or remove chain links with crank height adjustments. The cycle's upri
Full Electric Bed (Model 5410)
The Full Electric Bed is a motorized bed designed to offer the user six adjusting bed positions. Operated by a push button control, this bed is constructed with a single shaft, hi/low drive system. It also an emergengy hand crank. POWER: Hi/Low Motor - 60 rpm, camset: 48 revolutions (+)(-)2. DIMENSIONS: 88 x 36 inches (l x w). Height - 15.25 to 23.25 inches.
Semi Electric Bed (Model 5310)
The Semi Electric Bed is a motorized bed designed to offer the user four adjusting positions for the head and knees. The bed is permanently attached but can be folded away. A hi/low crank adjusts the bed's height. POWER: Motors - 85 rpm. DIMENSIONS: 88 x 36 inches (l x w); Height - 15(7/8) to 24(5/8) inches.
Manual Crank Bed (Model 5307)
The Manual Crank Bed is an adjustable bed designed with a two crank assembly that operates the head and foot sections. The hi/low crank system is constructed to insert into the head/foot ends to raise and lower the bed; the crank folds away for storage. DIMENSIONS (L xW): 88 x 36 inches. The overall bed height adjusts from 16 to 24.25 inches, the head end adjusts from 28 7/8 to 37.25 inches high, and the foot adjusts from 26.25 to 37 7/8 inches high.
Hugo 1000
The Hugo 1000 is an adult wheelchair. FRAME: Chrome plated / carbon steel; folding; 22.5 to 25.5 inches (overall width - open); 10.5 to 11.5 inches (overall width - closed). SEAT: 16.5 to 18 inches (width); 16 inches (depth); 21 inches (height); 16 inches (back height). ARMRESTS: Detachable. BRAKES: Manual. CASTERS: 8-inch molded caster wheels. FOOTRESTS: Detachable. WEIGHT: 37 to 42 pounds. OPTIONS: Choice of five arm styles available at extra cost. WARRANTY: Care Catalog Services will honor al
Rolls 4000 Series
The Rolls 4000 Series is an adult wheelchair. FRAME: Chrome plated / carbon steel reinforced frame; folding; rear anti-tippers are optional; 22.5 to 29.5 inches (overall width - open); 11.5 to 15.5 inches (overall width - closed); available in standard, wide, transport and recliner models. SEAT: 16 to 22 inches (width); 16 or 17 inches (depth); 20 inches (height); 16 or 33 inches (back height); solid folding seat is optional. ARMRESTS: Removable and swingback. BRAKES: Manual. WHEELS: Composite,
Allegro
The Allegro is a lightweight child or adult wheelchair designed to address a variety of positioning needs for people with mobility disabilities. FRAME: Folding modular crossbrace frame for growth capability in a choice of colors is standard. A rigid frame and a frame without seat rails are available. SEAT: The seat depth and back angle are adjustable to permit the acceptance of a variety of seating systems. An adjustable-height back, upholstered back canes, and fixed-height back canes for posit
The Flyer
The Flyer is a battery powered scooter designed to disassemble into five lightweight components in 60 seconds or less for persons with mobility disablities and limited hand strength. For this scooter, no tools are need for assembly/disassembly, and the electrical connections are made automatically when re-assembling. It is made of rust-free aluminum and can be stowed in trunks of most cars without the aid of a lifter. The scooter features a single level tiller for maneuvering; a large front bask
Ride-Lite 9000 Series
Manual drive adult wheelchair. 4 frame options. Adult model offers 14 to 18 inch seat width; 16, 17 or 18 inch seat depth; and 14 to 18 inch adjustable height back. Tall model offers a 21 3/4 inch seat height; 16 or 18 inch seat width; 18, 19 or 20 inch seat depth; and a 16 to 20 inch adjustable height backrest. Hemi model features a 15 1/2 or 17 1/2 inch seat height; 16, 18 or 20 inch seat width; and 16, 17 or 18 inch seat depth. Large model offers a 20 or 22 inch seat width; and a 16, 17 or 18
Action Pro, Action Pro-Sa & Action Pro-T
The Action Pro Series wheelch are manual drive sport wheelchairs for individuals with mobility disabilities. FRAME: Rigid aluminum frame available in a choice of colors. Anti-tips are optional. SEAT: Seat width from 14 to 20 inches in 1-inch increments; seat depth ranges from 14 to 18 inches in 1-inch increments; the seat height is adjustable in ranges from 8 to 12 inches, 10 to 14 inches, 14 to 18 inches, and 16 to 20 inches. The fold-down backrest angle adjusts from 0 to 8 degrees. Optional pu
Wheeled Chair Tables (Models 6890 & 6892)
Geriatric chair with tray table. Fixed steel frame. 34 inch overall length. 24 inch overall width. 18 inch seat width. 16 1/2 inch seat depth. 19 1/2 inch seat height. 26 inch back height. Padded seat and back. Fixed armrests. Footrest slides under chair during transfers. Permanently mounted tray table folds out of the way for storage. Model 6892 backrest reclines to 45 degrees in 5 degree increments. 5 inch casters. Push handle. Optional legrest. 4 upholstery colors. Weight, 62 pounds. .
Arrow Microcomputer Control (Mcc) Mk Ii
The Arrow Microcomputer Control (MCC) MK II is a motor and accessory control system designed for Invacare Arrow and Arrow XT series wheelchairs. The standard system includes a joystick with indoor/outdoor, high/low, on/off, and horn toggle switches; and battery level display, mode and level indicators. Other features include a standby mode; emergency stop switch input; and proportional head control compatibility. Adjustable performance features include indoor/outdoor performance, maximum speeds,
Switch Options/ecu Module For Arrow Mcc (Model 1551M)
Optional module installed into Arrow MCC wheelchair controller. Provides for switch, sip'n'puff, rim head control of wheelchair. Attendant control input. Two connectors, each with 4 ECU output switch closures, to operate recliner or other devices. Module provides method of controlling accessories by only adding one switch to basic joystick; also allows other control techniques. May set 1, 3, or 5 forward speeds; selectable cruise mode allows control to be released while chair continues forward;
Coated Steel Commode (Models 6456, 6457, 6476, & 6477)
Adjustable height commode. Height adjusts in one inch increments. Overall height 24 1/2 inches to 29 1/2 inches. Adjustable seat height 17 1/2 to 21 1/2 inches. Seat angle is adjustable by raising or lowering support frame for commode seat. Width between arms 17 1/2 inches. Support bar across back adds stability to frame. Bacterial resistant coating is warm to the touch. Plastic seat and lid. Frame has non-skid, non-marring rubber tips, and silencing collars to minimize rattles. Weight 12 pounds
Deluxe Commode (Models 6458 & 6478)
The Deluxe Commodes are height-adjustable commodes designed for use by individuals with mobility disabilities. These commodes feature welded steel frames, molded plastic armrests, heavy-duty plastic seats and hinges, non-skid and non-marring rubber tips, and silencing collars to minimize rattles. The seat angle is adjustable by raising or lowering support frame for commode seat. Model 6458 also features a back support bar for added stability. Model 6478 does not have the back support bar and ma
Transfer Bench (Models 990-1 & 990-3)
Transfer bench. Three molded seat sections with full back rest for added patient safety. Back rest can be for left or right access. Anodized aluminum frame. Seat is 16 inches deep by 29 1/2 inches long. Adjustable seat height 15 to 19 inches in one inch increments. Overall height 31 to 35 inches.
World Chair
Adult manual wheelchair. Folding steel frame. 16 or 18 inch seat width. 16 inch seat depth. 16 inch back height. 24 inch mag-style wheels with solid tires. 8 inch front casters with solid tires. Fixed or removable armrests, full or desk length. Swingaway removable footrests. Optional elevating footrests. Wheel locks. Weight 39 pounds not including footrests.
Shower / Bath Chair With Backrest (Model 1369)
Aluminum bath chair. Molded plastic seat has drain holes to keep water in the tub. Handles on each side. Non-slip textured finish with contoured seat and back. Flared legs. Non-slip rubber tips. Back height 13 inches. Weight 8 pounds. Fits inside standard tub.
Shower And Bath Seat (Models 6483, 6482, 6463, & 6462)
Adjustable height aluminum bath seat. Seat width 17 1/2 inches. Seat depth 16 inches. Seat height 16 to 20 inches. Padded vinyl seat and back. Rubber suction cups on all feet. Fits inside standard tub.
Mobile Shower Chair (Model 6358)
Caster shower chair assists with transport as well as shower functions. Five inch swivel casters for maneuverability, with wheel locks on rear casters. Nylon fabric backrest. Toilet seat and commode pail standard equipment. Aluminum tubing frame. Footrest. Optional Ensolite padded seat. Molded plastic full-length armrests. Fits over most toilets.
Shower And Bath Transfer Aid (Models 6481, 6484, 6461, & 6451)
Adjustable height aluminum bath seat. Seat width 17 1/2 inches. Seat depth 16 inches. Seat height 16 to 20 inches. Vinyl coated seat standard or deluxe padded Ensolite high-density foam padding, does not absorb moisture. Spans tub wall enabling easy transfer.
Invacare Power 9000
The Invacare Power 9000 is a powered wheelchair designed for use by adults with mobility disabilities. FRAME: Folding steel frame with aluminum cross braces in standard adult or low seat configurations. With the joystick, this chair is 21.75 to 27.75 inches wide when open in the adult model and 23.75 to 27.75 inches wide when open in the low seat model. With the joystick, both models are 14.5 inches wide folded. The adult model is 35.25 to 39.25 inches high and the low seat model is 33.25 to 37.
Total Knee Cpm
Continuous passive motion device. Portable. Digital display enables attendant to read cycles and elapsed time of CPM therapy, and to view flexion and extension limits while unit is running. Automatic load sensing reverses motion and gives off audible alarm when an object restricts motion of the leg carriage. Microprocessor controls range of motion and diagnoses errors. Can be interfaced with an Electrical Muscle Stimulation Unit. Non-skid pad prevents unit from moving during operation. Range of
Rolls 2000 Lt Series
Adult manual drive wheelchair. Folding aluminum frame. Epoxy coated finish. Vinyl upholstery. 16 or 18 inch seat width. 16 inch seat depth. 18 or 20 inch seat height. Back height 14, 16 or 18 inches. 24 inch mag style rear wheels with solid or pneumatic tires. 8 inch front casters with solid, pneumatic or semi-pneumatic tires. Fixed or adjustable height armrests, full or desk length. Swing-away removable footrests. Optional elevating footrests. Wheel locks. Weight without footrests, 27 to 30 pou
Economy Tub Transfer Bench (Model 6364)
Adjustable height bathtub transfer bench. Molded plastic. Wrap-around aluminum tubing back with arm rest for left or right side installation. Channel edge and drain holes direct water into tub. Aluminum frame with flared legs. Adjustable height from 15 1/2 to 20 inches in 1/2 inch increments. Overall length 28 inches. Overall width 16 inches. Seat to back height 11 inches. Weight 6 pounds.
Home Bed Rails (Models 6626 & 6628)
Adjustable bed rails for standard twin, single, or double beds. Tubular crossbraces in 8 preselected widths, 36 to 69 inches. Crossbrace fits between bed spring and mattress. Welded, chrome-plated 1 inch steel rails automatically lock in raised position. Rail length 46 to 74 inches. Rail height 20 inches. Telescoping model available with spring- loaded cross brace. .
Half Rails (Model 6630)
Chrome plated bed rail with two steel channel cross braces. Clamped to spring of hospital bed. Slide bushings accept two vertical tubes of each rail to guide it up and down. Single plunger on bracket releases and locks rail. Can be used with bed in all positions. Length 30 inches, fits bed widths 34 to 36 1/2 inches.
Endoflex Back
Contoured back with internal metal frame. Mounts in wheelchair frame with back hooks with nylon straps and buckles. Back height and back angle adjustable. Mid-back can flex or be fixed in one position. Vinyl or fabric. .
Magic Hand Evaluation Kit
Heavy duty adjustable hardware system for positioning devices in close proximity to user. Ball joints allow angulation but tighten securely to maintain position. Includes table mount bracket, quick tightening handle, terminating plate for keyboard evaluation.
Shoulder Retractors (Model Sr20)
Shoulder Retractors (model SR20) are malleable vinyl-coated pads on swingaway hardware designed to aid in trunk support of seated individuals. They will mount to aluminum pans or other rigid back panels.
Lateral Support (Model Ss20)
The swingaway Lateral Support (model SS20) can be mounted to aluminum pans or other rigid back panels, and it is designed to provide lateral trunk support to seated individuals. The support has a spring-loaded mechanism. It is adjustable forward and back and laterally. A malleable foam pad is included.
Flip Abductor (Model Ab20)
The Flip Abductor (model AB20) is a knee separator designed for seating systems and wheelchairs. It is a lever release flip-down abductor with an adjustable height of 1 to 4 inches. An Abductor Pad (model AB50, $60) can be ordered separately. The Abductor is 3 inches by 5 inches by 3 inches, and comes in black only.
Kiss (Keep It Simple) Simulator (Model Sm01)
The KISS (Keep It Simple) Simulator, model SM01, is a chrome steel frame seating evaluation system. It has adjustable seat depth, back height, back-to-seat angle, and tilt-in-space. The simulator folds for transportation. Removeable frames hold bags filled with plastic pellets for molding. Can be replaced with flat seat and back. OPTIONS: Accessories available include dual-head vacuum pump for molding (Model TL30, $700), adapter to mount unit on Arrow XT power wheelchair base, legrests, and Mag
Aluminum Shells
Aluminum Shells are designed for mounting on cushions in seating systems. Sizes range from 12 to 18 inches in width, 10 to 22 inches in length. Each shell has pre-punched holes for attaching interfacing hardware and accessories. They will fit Contour-U, Sunmate, Jay, T-foam, Roho, or custom cushions. The shells will support body weight up to 250 pounds.
Rigid Pelvic Stabilizer
Rigid bar with relief area in center for bladder. Padded for comfort. Quick release locks on each side. Small for 12 and 14 inch widths, large for 16 and 18 inch widths.
Pelvic Strap (Sb05)
The Pelvic Strap (model SB05) is a 1 1/2 inch nylon webbing belt designed to position, stablize and restrain an individual's pelvic area wen seated in a seating system or wheelchair. It has a push-button buckle closure. The strap's length is adjustable on one side, and there are three positioning grommets on opposite side.
Growth Links & Dial Links (Model Gl01 Through Gl06 & Gl10)
Growth Links (Model GL01 thru GL06) and Dial Links (GL10) are hardware designed for attaching seats and backs. They are designed to be used with aluminum pans, but Wood Adaptors (Model GL21, $40/pair) are available for mounting to wooden panels. The links come in pairs and have adjustable angles. Growth links are to be used when back is supported by separate frame. Dial links support back independently.
Mounting Brackets (Model Mb02 Thru Mb 06 & Mb12) & Trunion Mounts (Tm01, Tm02, Tm03, Tm11, Tm12 & Tm13)
Mounting Brackets and Trunion Brackets are interfacing hardware designed for mounting seating systems on a variety of mobility bases. Quick release or permanent mounts are available. The brackets ($25) are for mounting on wood or aluminum shells (see related entry) and come in two sizes: 7/8 inch and 1 inch. The trunion mounts ($58) are available in the same sizes.
Butterfly Strap (Models Bb01, Bb02, Bb03, Bb11, Bb12, Bb13, Bh01, Bh02, Bh03, Bh11, Bh12, Bh13)
The Butterfly Strap is a padded chest panel with vinyl upholstery designed for providing trunk support for seated individuals. It is available in buckle (BB-) and velcro (BH-) styles in sizes small, medium and large. The strap is available in black and gray.
Desk-Length Armrest (Model Ar20) And Full-Length Armrest (Ar24)
The Desk-Length Armrest (model AR20) and Full-Length Armrest (AR24) are single post armrests that come with mounting hardware and are designed for use on seating systems. They can be attached to aluminum pans to be non-removeable, removeable with fixed height, or height- adjustable with fixed lower limit. Desk-Length Armrests are 9 inches long and Full-Length are 14 inches long.
Tray Bracket (Model Tr30 & Tr31) And Tray Bracket Receptacle (Tr32)
The Tray Bracket ($50, model TR30 & TR31 for left and right armrests, respectively) and the Tray Bracket Receptacle ($70, TR32) are designed to attach a tray to the armrest of a wheelchair or seating system. The units are compatible with many armrests. The bracket is mounted on one armrest and the receptacle is mounted on one side of tray. Support on both sides is recommended for heavy duty applications.
Polycarbonate Tray (Model Tr03) & Elbow Pads (Tr21)
The Polycarbonate Tray (model TR03, $125) is a lapboard 1/4-inch thick with a rim across the front and sides designed for use on wheelchairs and seating systems. There is one size tray with cutout. The Elbow Protectors (TR21, $70) come in black only and are designed to be mounted to the tray.
Magic Hands
Heavy duty adjustable hardware system for mounting head and trunk supports. Ball joints allow angulation of supports but tighten securely to maintain position. Adapters allow mounting to aluminum pans or 7/8 inch tubing. Use with Otto Bock pads or custom-made flat pads. Quick handle for frequent adjustment.
Footrest Platform Tops And Bottoms
Top and bottom sections allow mounting of one-piece footplates to aluminum pans or other rigid seat panels. Removeable. Fixed or adjustable knee and ankle angles. X-style foot straps.
Individual Footrest And Tops
Footrest tops ($295 per pair) allow adjustment of knee angle. Anterior-posterior adjustment. Removeable hardware attaches to aluminum pans or other rigid seat panels. Bottom of tube has clamp to allow use of standard footrest L-bars. Footrest bottoms ($185 per pair) have flip-up footplate with heel loop. Small for 12 and 14 inch chairs, large for 16 and 18 inch chairs.
Adjustable Footrest
Tubular L-bar with adjustable angle footplate, heel loop and ankle strap. Small for 12 and 14 inch chairs, large for 16 and 18 inch chairs.
Impala & Impala Kit
Mobility base for use with Contour-U and other one-piece seating systems. Tilt in space adjustment from 8 degrees forward to 32 degrees back, with gas cylinders for weight assist in three weight ranges. Available with 12 inch spoked, 20 inch mag, or 24 inch mag rear wheels, quick release axles, 5 inch or 8 inch front casters. Interfacing hardware for aluminum pans included. Width adjustable to accommodate seating systems from 14 to 18 inches. Accommodates 14 to 21 inches seat depth. Supports up
Top End Racer
The Top End Racer is a three-wheeled racing wheelchair designed to allow people with mobility disabilities to participate in marathons and other racing events. The chair includes its own tool kit. FRAME: The rigid T-frame constructed of 6061 T6 aircraft aluminum alloy is available in open V-cage or I-cage. The upper and lower frame width is available in one inch increments from 11 to 15 inches. The overall length varies from 36 inches to 62 inches. The chair features a chrome-moly fork with comp
Tri-Scoot
Three wheeled powered wheelchair alternative. Overall frame length 42 1/ 2 inches. Overall frame width 19 inches. 18 inch seat width. 16 inch seat depth. Bucket seat swivels 360 degrees. Adjustable seat height from 20 to 24 inches. 16 inch back height. 12 or 24 volt front wheel drive operation. 2 speed or variable speed control. Maximum speed 4 miles per hour. Use of 2 batteries doubles the range from 8 to 16 miles. Maximum weight capacity 180 pounds. Disassembles for transport. Weight not inclu
Erick
Steel frame stroller with 7/8 inch tubing. 8 inch rear wheels with locks, and double 6 inch swivel front casters. Interchangeable firm back/seat with 10, 11 1/2, and 12 1/2 inch width seats, with depths ranging from 10 to 14 1/2 inches. Height adjustable foot plate, fire retardant quilted cover, lap belt standard. Red. Accessories available for positioning.
Modular Cushions
Prefabricated molded modular seat and back cushions. Seat cushions come with or without molded abductor. Back cushions are available in two heights per width. Available in widths of 12 inches, 14 inches, 16 inches and 18 inches. Available to fit into separately sold aluminum pans or mounted to wooden base. Optional: headrest, shoulder retractors, armrests, leg rests, lateral supports, chest straps, tilting base, mounting hardware.
Mobilite Homecare Bed Systems
Hospital type bed for home care. Three types: Full electric model electrically adjusts back and knee supports and raises or lowers bed. Semi-Electric model electrically adjusts back and knee supports, with manual crank to raise and lower bed. Manual models have cranks for all adjustments.
Total Cpm1 & Cpm2
Continuous passive motion machine. Anatomical alignment and movement. Attachments for use with hips, knees, ankles, shoulders or elbows. Flexion arc of 135 degrees for leg or 180 degrees for arm. Control Unit; single dial on microprocessor, push buttons to set and lock angle of flexion. Number of cycles and elapsed time are recorded. Hand control for user to stop or reverse any motion that causes discomfort.
4000 Series
Manual drive wheelchair, folding. Adult sizes, seat widths, 16, 18, 20 or 22 inches. Seat depth, 16 inches. Back height, 16 inches. Arms: fixed or detachable, fixed or adjustable height, full length or desk length. Screw attached stainless steel clothing guards. Arm lock, button spring release. Front rigging: swingaway footrests and elevating legrests; and telescopic legrests. Chrome plated carbon steel frames and crossbraces. Push handles with vinyl handgrips. Upholstery: embossed Naugahyde wit
1000E Series
Manual drive wheelchair, folding. Adult sizes, seat widths, 16 or 18 inches. Seat depth, 16 inches. Back height, 16 inches. Two frame types: FF fixed arm, fixed footrest; SA swingaway with permanent arms (08), full length removable arms (18) or desk length removable arms (28). Chrome-plated carbon steel frame and crossbrace. Push handles with vinyl handgrip. Flame retardant vinyl upholstery with reinforced lining. Twenty-four inch spoked wheels, solid rubber tires. Eight inch plastic mag style w
1000 Series
Manual drive wheelchair, folding. Adult sizes, seat widths, 16 or 18 inches. Seat depth, 16 inches. Back height, 16 inches. Arms: fixed or detachable, full length or desk length, fixed height. Arm lock, spring button release. Front rigging, swingaway footrests, swingaway elevating legrests and swingaway, elevating extended length legrests. Chrome plated carbon steel frame and crossbrace. Push handles with vinyl handgrip. Flame retardant vinyl upholstery with reinforced liner. Wheels: 24-inch com
Patient Lift Scale Attachment (Model 9033)
Scale attachment for patient lifter. Round dial.
Two Piece Sling (Models 9001 & 9001A)
Two piece sling, wide seat and back sections. Chains and bars included. Headrest available. Available with commode opening.
One Piece Contour Sling (Model 9005)
One piece sling, extends from knees to shoulders. Chains and hooks included. Headrest available. Available with commode opening.
Headrest Sling (Models 9013 & 9014)
Head support for use with patient lifters. Straps attach to lifter bar.
Angled Swivel Bar (Model 9029)
Angled swivel bar is inverted V shape to allow clearance of head. Straight swivel bar is needed for more seat clearance and all car transfers. CAPACITY: 400 pounds.
Comfort + Plus Clinical Recliner (Models 6902 & 6903)
Recliner chair with high back and full length armrests. Reclines to 3 positions. Legrest elevates as chair reclines. Four 5 inch casters. Self storing overlap table tray swings down to side. Upholstery is vinyl bonded to foam, flame and stain resistant seams. Push bar on back. Overall width 27 inches, overall depth 37 inches, overall height 45 1/2 inches, seat width 20 inches.
Ranger Ii - Rm900 Series
The Ranger II - RM900 Series is an adult powered wheelchair for everyday use. RWD: "Free-n-Easy" clutch system. CONTROLS: MCC RIIA Electronics with inductive joystick, 10 function performance menu, full self diagnostics capability, speed selector knob, optional easy remote programmer, an on-demand braking system for braking downhill, a circuit breaker, and automatic correction circuits to evenly maintain speed. SEAT: Seats width 14, 16, 18 & 20 inch widths. Seat depth 16 inches. Seat height
Comfort Plus, Comfort Plus Ii (Model 6960)
Seat lift recliner chair. Fully powered back; removable back for cleaning, portability; choice of upholstery; back reclines within 8 inches from wall; contoured back; arms elevate with seat; armrest covers; 5.5 inch thick seat made of multiply layered foam; ottoman extends prior to back reclining to allow elevation of legs while sitting upright; storage pouch; side mounted switch for powered recline and lift. Overall height 41 inches, overall width 30 inches, seat width 20 inches, seat depth 21
Clinare Bath
Portable, freestanding water hydraulic bath lift. Tilts to an upright position for entry and reclines to a natural bathing position once user is seated in unit. Contoured and cutaway shape facilitates water circulation in the perineal area. Operated by single lever control.
Child Commode Chair (Models 6380 & 6381)
The Child Commode Chair is designed for children with adjustable height legs, a swing-away safety bar, and a commode pail. OPTIONS: A padded headrest, adjustable footrests, seat reducer, and seat belt. DIMENSIONS: The seat is 14 x 14 inches; height adjusts from 13 to 17 inches.
Hydraulic Patient Lift (Models 9901 & 9902)
Hydraulic jack lifter, mast with adjustable width base. For attendant use. Variety of 1 and 2 piece slings available. Capacity 400 pounds. Base adjusts from 22 to 40 inches wide. Shifter handle for adjusting legs. Low offset base available, 6 inch clearance. Nonadjustable base available. Mast can also be used with tub saddle. Can be used for car transfer. Slings not included. Model 9917 with C base.
Portable Power Lifts 9700 Series (Models 9700 & 9701)
The Portable Power Lifts 9700 Series are hydraulic and powered transfer lifts designed to offer stability and assist caregivers of individuals who have difficulty making independent transfers. These lifts are completely adjustable to fit needs of all users. Each lift has a wide base leg stance for greater stability and they lock in open position for added safety. The height adjusts for all bed sizes and accomodates low tubs. The padded swivel bar offers 360 degree rotation and the six hook desig
Invarail (Model 6625)
Chrome plated telescoping side rails for hospital bed with flat channel cross braces. Adjustable width for universal attachment to any hospital bed spring 34 to 36 1/2 inches. Rails telescope from 74 to 47 inches in length. Easy to install.
Cerebral Palsy Walker (Models 6533, 6532, & 6531)
Four legged wheeled base with 2 inch swivel casters on all legs. Rear legs also have skids to slow the movement. Forward handle bar and midline bar to prevent legs from crossing. Padded balance ring. Adult size (model 6533) height adjusts for persons 54 to 72 inches tall, base area 24 by 34 inches, balance ring height adjusts 34 to 50 inches, ring opening 12 by 15 inches. Junior size (model 6532) height adjusts for persons 48 to 58 inches tall, base area 21 by 34 inches, balance ring height adju
Folding Compact Walker (Models 6200 & 6532)
Folding walker with swivel wheels on all four legs. Padded seat can fold down when required. Padded back rest. Seat and walker heights adjustable. Hand brakes optional. Folds to 7 inches thick. Adult (model 6200) width between sides 19 inches, base area 22 by 30 inches, handrail height 19 to 22 inches, weight 31 pounds, 5 inch wheels. Junior (model 6532) width between sides 17 inches, base area 20 by 30 inches, handrail height 26 to 36 inches, seat 12 by 17 inches, seat height 18 to 21 inches, w
Forearm Rest Attachment (Model 6035)
Neolite covered trough and vertical handgrips that adjust fore, aft, and rotate. For attachment to Invacare wheeled walkers.
Wheeled Walker (Models 6531 & 6527)
Nonfolding walker with 4 inch swivel wheels on all four legs. Padded seat can fold down when required. Padded back rest. Seat and walker heights adjustable. Hand brakes optional. Adult (model 6531) width between sides 19 inches, base area 22 by 30 inches, handrail height adjusts 27 to 40 inches, seat 12 by 19 inches, seat height 19 to 22 inches, weight 31 pounds. Junior (model 6527) width between side 17 inches, base area 20 by 30 inches, handrail height adjusts 26 to 36 inches, seat 12 by 17 in
Toilet Safety Frame - Knock Down Design (Model 1392Kd)
The Toilet Safety Frame - Knock-Down Design, model 1392KD, is an adjustable-height toilet safety frame designed for use by individuals with arthritis or balance or mobility disabilities. Made from anodized aluminum tubing, the frame attaches with an aluminum bracket. Armrests provide secure hand support. The arms fold back for cleaning and can be removed for transfers. DIMENSIONS: Arm height is 25.75 to 30 inches. Width between arms is 17.5 to 20.5 inches. Tubing is 1 inch in diameter. CAPACITY:
Tub Transfer Chair (Model 6361)
Transfer tub bench, padded slat seat and back support. Transfer extension with two legs outside bathtub. Side arm on one side. Legs flared for added stability, two with suction holders. Beige vinyl over closed cell foam, seat 3 5/8 inches thick. Overall width 21 inches, length 33 1/2 inches. Seat height 16 1/2 to 20 inches in 1/2 inch increments.
Caster Shower Chair (Model 6360)
Shower chair on 5 inch casters, rear caster locks. Anodized aluminum frame, open front plastic commode seat and arm rests, nylon fabric backrest. No legrests, fixed full length arms. Overall width 21 inches, seat width 18 inches, seat height 21 inches.
Invacare Knee Walker 65960
The Invacare Knee Walker offers a cushioned substitution for crutches.
This walker features an easy-to-operate ergonomic hand brake, soft knee pad, and easy folding for storage or transport. It provides maneuverability with the 5 inch front swivel wheels and height adjustability for a custom fit. A basket is also standard for this model.
Spree Xt
The Spree XT is a child's folding tilt-in-space wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities. FRAME (HxLxW): Range of 36.5 to 44 x 29.5 (without anti-tips and front rigging) x 7.5 plus seat width for 12 or 20 inch wheels and 8.75 plus seat width for 22 or 24 inch wheels (all dimensions in inches). The folding tilt-in-space frame has folding crossbraces and two-way fold-down back canes. The depth and width of the crossbraces can grow with t
Compass Spt Wheelchair
The Compass SPT Wheelchair is an adult tilt-in-space wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. The chair is configured for front wheel manual propulsion and can be re-configured to rear wheel propulsion without any additional parts. FRAME (LxW): 35.5 to 39.5 x 22.5 to 30.5 inches. The tilt frame offers tilt in space of 0 to 45 degrees. SEAT (LxW): 15 to 22 x 14 to 22 inches. The seat to floor height is 13.5 to
Storm Series Tdx5
The Storm Series TDX 5 is a powered wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 33.25 to 41inches (depending on seating system) x 35.25 x 25 inches (26.5 with joystick). This chair includes Stability Lock and SureStep suspension configured for obstacles up to 3 inches high. Finish options include basic colors (deep purple, cobalt blue, anthracite, wet black, red, silver vein, lavender, wet black wit
Ivc 9000 Jymni Wheelchair
The IVC 9000 Jymni Wheelchair is a manual child's wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: Chrome-plated carbon steel frame with stroller handles, available in lightweight or recliner style. SEAT (LxW): 10, 12, or 14 x 10, 12, or 14 inches. The seat to floor height is 15, 16, or 17 inches depending on wheel and caster package. The back height is adjustable from 14 to 15 inches. UPHOLSTERY: Fire-retardant up
Invacare Mvp Jr.
MVP Jr. is a manual child's wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: Folding frame. The chair is available with three rear frame options (curved, square, or extended). SEAT (LxW): 9 to 19 x 12 to 16 inches. The seat to floor height adjusts from 15.25 to 21.25 inches in front and from 14.75 to 21.25 inches in the rear. An adjustable angle back option on the square frame offers four discrete positions. BRAKE
Storm Series Tdx3
The Storm Series TDX 3 is a powered wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 34 to 41 (depending on seating system) x 35.25 x 25 (26.5 with joystick) inches. Includes Stability Lock and SureStep suspension configured for obstacles up to 3 inches high. Finish options include Basic Colors (Deep Purple, Cobalt Blue, Anthracite, Wet Black, Red, Silver Vein, Lavender, Wet Black with Twilight Sparkle,
Storm Series Tdx4
The Storm Series TDX 4 is a powered wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 33.25 to 41 (depending on seating system) x 35.25 x 25.5 inches (28.5 inches with 20-inch joystick). The frame includes Stability Lock and SureStep suspension configured for obstacles up to 3 inches high. Finish options include basic colors (deep purple, cobalt blue, anthracite, wet black, red, silver vein, lavender, wet
A4 Titanium
The A4 Titanium is a lightweight wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Titanium frame with infinite center-of-gravity adjustment and a full suspension option. The overall frame width ranges from 18.75 to 36.5 inches. A tapered or V front end are available at no extra charge. The frame is available in a choice of 22 colors. Rear anti-tips are optional. SEAT: Available with seat width from 12 to 22 inches and seat depth from 14 to 22 in
A-6 & A-6S
The A-6 and A-6S are lightweight wheelchairs designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: The A-6S comes standard with a rigid suspension and the A-6 is standard without the suspension. The overall width for both models is available from 20.75 to 34.5 inches. A tapered front end or a non-tapered V front end are available at no extra charge. The frame width and depth are available in a range of sizes from 14 x 14 inches to 20 x 20 inches in one-inch inc
Invacare Raised Toilet Seat (Model 685-4)
The Invacare Raised Toilet Seat, model 685-4, is an elevated toilet seat designed for use by individuals with arthritis or mobility or lower extremity disabilities. Made of molded composite plastic, this contoured seat elevates the existing seat height by 5 inches. The seat includes Microban antimicrobial protection. DIMENSIONS (HxLxW): 5 x 15.5 x 14.75 inches. WEIGHT: 3 pounds, 6 ounces. CAPACITY: 250 pounds. WARRANTY: 3 year limited warranty.
Walklite Walker (Model 6300-Ata)
The WalkLite Walker, model 6300-ATA, is a height-adjustable folding wheeled walker designed for use by individuals with balance, lower extremity, or walking disabilities. This walker has a lightweight aluminum frame with dual-paddle folding mechanism, flip-up seat, flexible backrest, built-in carrying handle, adjustable seat-to-floor height, fixed front wheels, and rear spring-loaded SureGlide brakes. DIMENSIONS: The height is adjustable from 32 to 39 inches. The walker is 7 inches deep when fol
Junior Walklite Walker (Model 6300-Jra)
Junior WalkLite Walker, model 6300-JRA, is a folding, height-adjustable wheeled walker with seat designed for use by individuals with balance, lower extremity, or walking disabilities. Designed for larger children or smaller adults, this walker has a lightweight aluminum frame with a flexible backrest and an ergonomic dual-paddle folding mechanisms. Other features include a flip-up seat, fixed front wheels, rear spring-loaded SureGlide brakes, a built in carrying handle, and adjustable seat-to-f
Invacare Venture Homefill Ii
The Invacare Venture HomeFill II is a portable oxygen system designed for use by individuals with respiratory disabilities. This system enables users to fill portable high-pressure oxygen cylinders at home, eliminating the need for deliveries. Unlimited portable oxygen cylinders may be filled repeatedly and last up to five hours at two liters per minute (LPM) equivalent flow. Cylinders may be worn over the shoulder or around the waist and have built-in regulators and conserving devices. OPTIONS:
Mariner
The Mariner is a wheelchair shower commode designed for use by individuals with severe physical, lower extremity, or mobility disabilities or spinal cord injury. This commode comes standard with a commode pan and holder with safety strap. FRAME: The lightweight, folding aluminum frame with stainless steel hardware fits over most elongated toilets and can be used in the shower. Push handles are standard. This chair is 26.5 inches wide open and 12 inches wide folded. SEAT (WxDxH): The standard fou
Salter Disposable Nebulizer
The Salter Dispoable Nebulizer is a nebulizer designed for use by individuals with respiratory disabilities. This unit nebulizes 3 cubic centimeters in 7 minutes or less for shortened treatment times. This device can be used in a horizontal or vertical position. An anti-drool "T" prevents medication contamination from saliva.
Salter Reusable Nebulizer
The Salter Reusable Nebulizer is a nebulizer designed for use by individuals with respiratory disabilities. The unit has an integral anti-drool feature and nebulizes 3 cubic centimeters in 7 minutes or less at seven liters per minute (LPM). This nebulizer can be used in a horizontal or vertical position. The device incorporates one-way valves at the inlet and outlet paths. Componets are top shelf dishwasher safe or may be autoclaved or hand washed.
Invacare Ivc Tracer Ex2 Wheelchair
The Invacare IVC Tracer EX2 is a manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Carbon steel frame with triple chrome plating and 14-gauge cross braces. SEAT (LxW): 16, 18, or 20 x 16 inches. The floor-to-seat height is 17.5 to 19.5 inches. UPHOLSTERY: Flame-retardant vinyl dual-embossed upholstery with heavy-duty inner liners in blue, ruby, or black. ARMRESTS: Padded full-length permanent arms, padded full-length fixed-height removable
Top End Terminator Everyday Wheelchair
The Top End Terminator Everyday Wheelchair is a lightweight manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Custom-built rigid lightweight frame with 1-inch diameter chrome-moly tubing. Custom dimensions include position of front caster housings, adjustable center of gravity, front and rear seat height, and front frame angle. Options include curved or square rear frame, tapered or V front frame, rear suspension system, Frog Legs suspensi
Top End Terminator Titanium Wheelchair
The Top End-Terminator Titanium Wheelchair is a heavy-duty manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Custom-built rigid lightweight frame with 1-inch diameter chrome-moly tubing. Custom dimensions include position of front caster housings, adjustable center of gravity, front and rear seat height and front frame angle. Options include curved or square rear frame, tapered or V front frame, a rear suspension system, anti-tip bars, and
Invacare Xtra
The Invacare Xtra is a folding adult or children's manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Three-piece modular frame with one-inch aluminum tubing. The front frame section can be replaced to allow for growth. The square rear frame allows the wheels to be mounted directly under the back canes. This chair is available in a variety of colors. SEAT (LxW): 14 to 22 x 14 to 22 inches. ARMRESTS: Two-point or swing-away arms. WHEELS: Th
Top End Paul Schulte Signature Titanium Bb Wheelchair
The Top End Paul Schulte Signature Titanium BB is a basketball wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: 6061 T6 aluminum frame with welded-in-place offensive wing/bumper, fixed swivel anti-tip bar, and custom axle position, wheelbase, and center of gravity. The front frame angle is 80, 90, or 100 degrees. SEAT (LxW): 14 to 18 x 12 to 19 inches. Tapered seat width is optional. The floor- to-seat height is 16 to 21 inches in front and 13 t
Top End X-Terminator Qr Sports Wheelchair
The Top End X-Terminator QR Sports Wheelchair is a sports wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This chair is specifically designed for playing quad rugby. FRAME: The frame is custom 4130 chrome moly steel. It features an adjustable center of gravity, an offensive wing in front of or behind the caster housings, fixed or folding aluminum side guards, front and rear frame protectors, a swivel QR anti-tip bar and detachable push handles. SEAT:
Invacare 3G Torque Wp Rwd Power Chair
The Invacare 3G Torque SP RWD is a power wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 28.5 to 31.5 x 12 to 24 inches. Minimum turning radius is 31.9 inches. CONTROLS: MKIV RII (standard) or MKIV-A with switch options. RWD: Rear wheel drive with a 4-pole motor is standard; a GB motor with TrueTrack is optional. SEAT (LxW): 12 to 20 x 12 to 20 inches. The floor-to-seat height is 17.5 to 21 inches. Seating options include tilt, recline,
Invacare Pro Spin X4
The Invacare ProSPIN X4 is a lightweight folding manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: The lightweight aluminum frame available in 21 different colors. SEAT (LxW): 14 to 20 x 14 to 20 inches. The front floor-to-seat height is 15.5 to 21.5 inches and the rear floor-to-seat height is 13.5 to 20.5 inches. The back can be tilted up to 15 degrees forward or back. ARMRESTS: Flip-up height-adjustable padded arms in two-point or T-arm
Invacare 3G Ranger X Rwd
The Invacare 3G Ranger X RWD is a reclining powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 28.5 to 31.5 x 25 inches. The frame is equipped with rear independent suspension and is available in a choice of 21 colors. A transport-ready option is available. CONTROLS: MKIV-A controller with switch options. RWD: Rear wheel drive. SEAT (LxW): 12 to 22 x 12 to 22 inches. The floor-to-seat height is adjustable to 17.5, 19.5 or 21 inches.
Invacare Pronto M50 With Surestep Power Chair
The Invacare Pronto M50 with SureStep is a compact powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 34 x 24 inches with the foot board up, or 38 x 40 inches with the footboard down. This chair has a turning radius of 19.5 inches and a ground clearance of 2.6 inches. The shroud is available in deep blue pearl or candy red pearl. CONTROLS: Easy Remote programmer. MWD: The mid wheel drive allows for driving over thresholds and transi
Invacare Pronto M94 Bariatric Power Chair
The Invacare Pronto M94 Bariatric Power Chair is a heavy-duty power wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 36 x 28 inches. The turning radius is 19.5 inches. The shroud is available in red, blue, or black. CONTROLS: An MKV NX80 controller is standard. An upgrade to an MKV EX controller is optional. MWD: The mid- wheel drive allows for driving over thresholds and transitions up to 2 inches high. SEAT (LxW): 16 x 18 inches. The flo
Invacare Lynx L-3 3-Wheel Microportable Scooter
The Invacare Lynx L-3 3-Wheel Microportable is a three-wheeled powered scooter designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (HxLxW): 36 x 39.8 x 26 inches. The ground clearance is 4 inches. This scooter can be disassembled into four pieces for transport in the trunk of a car. The frame is available in red or blue. SEAT (LxW): 14.5 x 16.5 inches. The seat height is adjustable from 14 to 16 inches. A seat positioning strap is optional. WHEELS: 8 x 2 inch
Invacare Lynx L-4 4-Wheel Microportable Scooter
The Invacare Lynx L-4 4-Wheel Microportable is a four-wheeled power scooter designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (HxLxW): 36 x 39.8 x 26 inches. The ground clearance is 4 inches and turning radius is 51.2 inches. This scooter can be disassembled into four pieces for transport in the trunk of a car. This scooter is available in red or blue. SEAT (LxW): 14.5 x 16.5 inches. The seat height is adjustable from 14 to 16 inches. A seat positioning stra
Invacare Top End Transformer All Sport
The Invacare Top End Transformer All Sport is a manual sports wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This chair can be adjusted to play tennis, softball, basketball, hockey, football, table tennis, or badminton. FRAME: Rigid 606IT6 aluminum frame with a removable offensive wing or bumper and an adjustable center of gravity. The frame is available in Tall or Short sizes. SEAT (LxW): 12 to 20 x 12 to 20 inches. The floor-to-seat height is adju
Invacare Ivc Lightweight Aluminum Transport Chair
The Invacare IVC Lightweight Aluminum Transport Chair is a folding adult transport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 24.5 x 23.5 inches. The folding frame is made of lightweight aluminum. SEAT (LxW): 17 x 19 inches. The floor- to-seat height is 19.25 inches. The back folds down for transport. UPHOLSTERY: Flame-retardant, bacteria-resistant black nylon upholstery. ARMRESTS: Permanent full-length padded armrests. BRAKES: Wheel
Invacare Careguard K2000
The Invacare CareGuard K2000 is a folding adult manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 31.25 x 23 or 25 inches with permanent arms. With removable arms the width is 24.25 or 26.25 inches. SEAT (LxW): 16 x 16 or 18 inches. The floor-to-seat height is 20 inches with 24-inch wheels. The hemi floor-to-seat height is 18 inches. UPHOLSTERY: Black flame- retardant and bacteria resistant vinyl upholstery. ARMRESTS: Padded, fixed-h
Invacare Ivc 9000 Topaz Wheelchair
The Invacare IVC 9000 Topaz is a folding bariatric adult manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Triple chrome-plated, carbon steel frame. Options include an oxygen carrier, telescoping IV rod, and a crutch/cane carrier. SEAT (LxW): 18 or 20 x 20 to 30 inches in 2 inch increments. The floor-to-seat height is 15.5, 17.5, or 19.5 depending on wheel and caster package. UPHOLSTERY: Black or blue vinyl or nylon. The upholstery is flam
Invacare Tdx Sp Rehab Seat Power Wheelchair
The Invacare TDX SP Rehab Seat Power Wheelchair is a compact powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 35.25 x 24 inches without front riggings. It has a turning radius of 22 inches and a ground clearance of 3 inches. CONTROLS: MK690/SPJ+. MWD: This wheel chair utilizes True Center Wheel drive and Enhanced SureStep allowing the user to drive over thresholds of up to 3 inches. SEAT L x W: 12 to 22 x 12 to 24 inches. The floor
Top End Crossfire All Terrain Rigid Wheelchair
The Top End Crossfire All Terrain Rigid Wheelchair is an all-terrain sport wheelchair designed for use by adults with mobility or lower extremity disabilities or spinal cord injury. FRAME: Custom built rigid aluminum ultra-lightweight open frame or cantilever design. The center of gravity is available in an active position or an amputee position. The frame is available in a choice of wet black, black prism, copper penny, cosmic blue, electric blue, electric red, electric green, emerald green, fr
Top End Force Handcycle
The Top End Force Handcycle is a hand-propelled recumbent cycle designed for use by individuals with severe physical or lower extremity disabilities or spinal cord injury. This 27-speed cycle is operated by a hands-on shifter/ brake. The back angle is adjustable from 35 to 55 degrees. Other adjustable dimensions include back height, crank height, fore and aft seat position, and footrest position. The footrests come with safety straps. DIMENSIONS: Seat width is 14, 15, 16, 17, or 18 inches. Seat
3G Arrow Rear Wheel Drive Power Wheelchair With Truetrack
The 3G Arrow Rear Wheel Drive Power Wheelchair with TrueTrack is a powered wheelchair designed for use by individuals with mobility, neurological, or lower extremity disabilities or spinal cord injury. TrueTrack technology translates the driver's commands to help keep the power chair on a true forward path and minimize the need for veer correction on slopes, thresholds, and uneven terrain. FRAME (LxW): 28.5 (short base) or 31.5 (long base) x 12 to 24 inches. The frame is available in silver, bla
Drop-Arm Commode (Model 9669)
The Drop Arm Commode is a commode with removable arms designed for use by individuals with mobility or severe physical disabilities. Designed to aid with transfers within restricted or confined areas, this commode features lever release for drop down-arm, angled legs with adjustable-height leg extensions, silencing collars to minimize rattles, four non-skid rubber tips, and snap-on seat and lid. OPTIONS: Convertible to mobile model with optional adjustable wheeled legs. A splash shield is availa
Invacare Molded Tub Bar (Model 710-4)
The Invacare Molded Tub Bar, model 710-4, is a grab bar for bathtub designed for use by individuals with balance or mobility disabilities or arthritis. Made of molded plastic, this unit attaches to the wall of the bathtub to provide two gripping surfaces. The upper gripping surface helps the user to enter the tub, and the lower gripping surface assists the user in lowering into or rising from a seated position in the tub. The unit has an adjustable locking mechanism for attaching to the wall of
Invacare White Grab Bar (Models 312-3, 316-3, 318-3, 324-3, & 332-3)
The Invacare White Grab Bar is a wall grab bar designed for use by individuals with balance or mobility disabilities in bathrooms. The grab bar is made of steel with a vinyl coating. DIMENSIONS: 1 inch diameter with length of 12 inches (model 312-3), 16 inches (model 316-3), 18 inches (model 318-3), 24 inches (model 324-3), or 32 inches (model 332-3). Wall clearance is 3.75 inches. CAPACITY: 250 pounds. WEIGHT: 1 pound (312-3), 1 pound 4 ounces (316-3), 1 pound 8 ounces (318-3), 1 pound 12 ounce
Invacare Knurled Chrome Grab Bar (Models 512-3, 516-3, 518-3, 524-3. & 532-3)
The Invacare Knurled Chrome Grab Bar is a bathroom wall grab bar designed for use by individuals with balance or mobility disabilities. This grab bar is made of chrome-plated steel with a knurled surface. It mounts at a variety of angles to a wall's structural supports. Rubber gaskets protect the wall surface. DIMENSIONS: 1 inch diameter with length of 12 inches (model 512-3), 16 inches (model 516-3), 18 inches (model 518-3), 24 inches (model 524-3), or 32 inches (model 532-3). Wall clearance is
Truetrack Blood Glucose Monitoring System
The TrueTrack Blood Glucose Monitoring System is a glucose analyzer designed for use by individuals with diabetes. The unit has a 365-test memory with 7- and 30-day averaging. The user can test on the arm or finger. The unit turns on automatically when a test strip is inserted, and provides results in 10 seconds from a micro-microliter blood sample. Results appear on a liquid crystal display (LCD) screen. WARRANTY: Lifetime warranty.
Trueread Blood Glucose Monioring System
The TRUEread Blood Glucose Monitoring System is a glucose analyzer designed for use by individuals with diabetes. The unit automatically turns on when a test strip is inserted and provides results in 10 seconds. Results are displayed on aliquid crystal display (LCD) screen. The unit uses a one-microliter sample. The unit has a 200-test memory with uploading capability. WARRANTY: Lifetime.
Solo2 Transportable Oxygen Concentrator Kit (Model Tpo100B)
The SOLO2 Transportable Oxygen Concentrator, model TPO100B, is an oxygen concentrator designed for use by individuals with respiratory disabilities. This unit offers continuous flow oxygen up to three liters per minute (LPM) or pulse dose oxygen in settings 1 to 5. A wheeled cart is included. POWER: Uses the supplemental battery, alternating current (AC) power cord or direct current (DC) adapter (all included). The battery provides 2.6 hours of oxygen at two liters per minute continuous flow. DI
Forearm Crutches -Tall Adult
The Forearm Crutches-Tall Adult are forearm crutches designed for use by individuals between 6 feet and 6 feet, 6 inches tall with walking or balance disabilities. These aluminum crutches have vinyl coating, aluminum cuffs, cushioned vinyl handgrips, and extra-large crutch tips. DIMENSIONS: The cuffs are 1 inch. CAPACITY: 300 pounds. WARRANTY: Three-year limited warranty.
Invacare Reliant Linak Battery Pack, Model-1078276
Invacare Reliant Linak Battery Pack is to be used with Reliant Power Lifts (product code # RPL450-2, RHL450-1, RPL600-1, RPL600-2, RPS350-2, RPL450-1 and RPS350-1). It beeps when battery needs to be recharged and requires one 24-volt battery. Charger used for this battery is available separately (Code # 1078274).
G-Series Bed
Invacare Reliant Linak Battery Pack (Model 1078276)
The Invacare Reliant Linak Battery Pack (Model 1078276) is designed for users who use powered wheelchairs, to be used with Reliant Power Lifts. The design features anti-entrapment that stops motion is the boom meets resistance while lowering. The battery pack can be exchanged of mounted on the charger and/or the control box using Linak mounting brackets. The battery pack beeps when the battery needs to be recharged and required one 24-volt battery. Charger used for this battery is available sepa
CareGuard Standard Sling without Commode Opening
The CareGuard Standard Sling without Commode Opening is a transfer sling designed for use by individuals with mobility and balance disabilities. The sling commode opening can be used on heavy or light patients. It can be used for weighing, transferring, or to simply reposition the patient. Polyester mesh fabric supports the patient from shoulders to the knees.
3-Position Recliner Geri Chair
The 3-Position Recliner is a comfortable, durable geri chair with a leg ottoman and three possible positions; sitting, legs elevated, or fully reclined. The included blow-molded table can be locked in one of five positions, and slides on and off. Each 3-Position Recliner has a contoured seat back and articulating headrest for extra comfort. A special crossweave in the foam back and seat cushions supports the user and prevents "bottoming out". Blow-molded side panels are easy to remove and clean,